19
Mount the wire end with its steel thimble to the
KULLENBERG releaser (pos. 1) by the steel bolt.
(Do not forget to make a control check).
20
You may attach the liners into the steel tube
adding the orange peel system and the carver.
Fasten with two spikes.
For different lengths of corer tubes the steel wires
much be replaced with the appropriate length.
21
The piston corer is now ready for operating.
When the piston corer is hinged outboard the ship,
remove the safety-lock (pos. 14) and the piston
corer is ready for use.
22
WARNING: Never remove the safety lock
before the piston corer is outboard the ship.
It poses great danger for personnel to
remove the safety lock inboard the ship.