27
Insert piston B at the end of the sample tube and
then slide adapter A down the steel tube. The
smallest part of the adapter must point towards
the sample tube.
28
Insert the tube with the wheel at opposite end of
the steel tube; the tube has a small hole. Align this
hole over the Allen screw; unscrew the Allen screw
counter clockwise to lock the tubes.
29
The adapter A will fit into the sample tube to
centre the piston rod during ejection.
30
The adapter A is now in the correct position.
31
Push D and release C; now the lock for the wire
has been disabled, pull out the wire E and guide it
over the wheel, see item 29/30. Attach the snap
hook at the end of the wire to the eye F.
Push C into opposite position and by turning the
handle forth and back, you will now force the
piston through the sample tube ejecting the
sample.
32
Trestles made of AISI 316 stainless steel will
secure the core tubes in a convenient working
height.
We can provide replaceable jaws of different sizes
allow using a wide range of tube diameters.