FRAMELESS GLASS CORNER UNIT
#16525
PAGE 7 OF 8
www.kc-store-fixtures.com
7400 E. 12th Street, Kansas City, MO 64126 • 1-800-862-0899
STEP 9
Attach bottom door hinge (C) to lower, right corner of door
panel (R). Make sure screws are on the inside of the door and
post is pointing down. Place cup in hole on wood base then in-
sert post. Tighten pre-attached screws to secure hinge tightly
to glass. Insert hinge post into hole on wood base.
STEP 10
Place cup on top of post prior to inserting into pre-drilled hole on top
glass panel. Keep hinge in place while using the other hand to holding
door perpendicular to the tower, slide top corner of door (R) into hinge
and finger tighten screws. (Do not tighten screws all the way).
Once in place, make sure door swings evenly and smoothly before fully
tightening screws on top hinge. If door does not swing smoothly, make
small adjustments by sliding the corner of the door in or out of hinge until
the correct position is found. Then firmly tighten screws on top hinge.
C
R
Top hinge
Bottom hinge
