KBT Mobile G902, User Manual

Page: 13 / 83

- 13
2.5.3 How to charge the battery
1. Plug your charger in the wall socket.
2. Connect the other end to the interface connector on the bottom of the phone.
! Note
The phone will automatically check the battery status while the charger connector is installed on the
phone. Once it detects that the battery level
1. Full status, it automatically recharges the battery.
2. Normally the phone completes battery charging in one hour.
3. For a new or completely discharged battery, it takes at least 4 hours of charging to achieve
optimum performance.
4. You can make calls while charging your phone.
5. Do not charge the phone without the battery in place.
2.6 Headset
Insert the headset plug into the jack on the left side of your phone marked
You can answer or end a call by pressing the hook button on the headset.
When you receive an incoming call while a call is in progress, you can answer the incoming call by
pressing the hook button on the headset. (The first call is automatically put on hold.)
You can make the last number dialed call by pressing the hook button when the screen is idle.
The last number dialed is launched by pressing the hook button, and then the call will be made by
pressing the hook button again.
! Note : If the headset is plugged in, your phone’s standby time will be reduced. Therefore, please
remove the headset when not in use.