16
GB-Teppanyaki Electric
Oriental-Electric-20201023
F
R
M
-P
D
E
-03
-04 (
N
Y
T
/R
&
D
/2
0
2010
23
)
The following instructions are intended for authorized and qualified installer. Before doing installation, adjustment,
and maintenance operations, the installer must follow local and legal regulations. Cut the gas/electric supply before
doing any installation.
1.
This appliance is using electric power. Electric services should be installed according to:
a.
Local and international standards
b.
Local recommendations related to building standards and codes
c.
Directions and regulations from power supply companies
d.
Regulation concern with prevention accident measures
e.
Fire prevention regulations
f.
Applicable I.E.C (International Electro technical Commission) regulations
2.
Remove all packaging material and protective coatings.
3.
Ensure electric power supply is sufficient to operate this appliance.
4.
Before testing, put the appliance in a good ventilated room and keep all flammable material away.
5.
Before cleaning or maintaining the appliance, please cut off electric power and isolate gas supply (if any) to the
safe place.
4.1 Packaging and Transport
4.1.1 Packaging
The packaging is designed to reduce space and as appropriate to the type of transport used. To simplify
transport, some components may be removed and suitably protected and packed for transport.
The packaging carries all information necessary for loading and unloading. When unpacking, check that all
components are present in the correct quantities and are undamaged. The packaging material must be properly
disposed of in accordance with legal requirements.
4.1.2 Transport
Different means of transport may be used, depending partly on the destination.
During transport, fix the packaging to the means of transport securely to prevent undesirable shifting.
4.2 Handling and Lifting
The appliance can be handled using fork-lift or hook equipment of suitable load-carrying capacity. Before lifting,
check the position of the load’s centre of gravity.
Important!
Before installing, place the appliance on solid, flat, stable and horizontal surface and
connection availability.
Important!
When engaging with the lifting equipment, watch out for the gas/electric supply.
4. Handling and Installing
H
andling an
d I
n
s
talling
