- 21 -
EN
d
Short-circuit of the surface
temperature sensor or
overheating of the work
surface
In the case of overheating protection
make sure the air inlet and outlet are not
blockedû the fan is not damagedû the ambient
temperature does not exceed 40
o
Cû the
device does not run without the heat
receiver on dry run
Need to be
professionally
maintained
A
The device temperature
sensor is defective
”eplace the device temperature sensor
C
Short-circuit or excessive
temperature of the IGBT
temperature sensor
In the case of overheating protection
make sure the air inlet and outlet are not
blockedû the fan is not damagedû the ambient
temperature does not exceed 40
o
C
B
Open circuit of the IGBT
temperature detector
”eplace the IGBT temperature sensor
n
”esonant circuit of the
induction coilû short-circuit
protection
Make sure that the induction coil and the
high-voltage circuit are open
—
–
—
IGBT over-current
protection
Need to be professionally maintained.
10.
DISPOSING OF USED EQUIPMENT
Information for users about the proper principles of disposal of waste electric and electronic
equipment
•
Leave the old device in the store where you are buying a new device.
Each store has an obliga
-
tion to take your old equipment free of charge if you buy new equipment of the same type and in the
same quantity. The only condition is to deliver the equipment to the store at your own expense.
•
Take the used device to a collection point.
You will ind information about the nearest location on
the municipal website or bulletin board of the municipal ofice.
•
Leave the device at the service point.
If the repair of the device is uneconomical or impossible for
technical reasonsû the service is obliged accept the device free of charge.
•
Return used equipment without leaving your house.
If you don’t have the time or ability to trans
-
port your equipment to a collection pointû you can use the services of specialized companies.
Remember! Do not dispose of used equipment along with household waste.
This could cause high ines.
The symbol of the crossed-out waste bin on the productû its packaging or the instruction
manual means that the product should not be disposed of to normal waste bins. The user
is obliged to hand over the used equipment to a designated collection point for proper
processing.
11. WARRANTY
The seller shall be liable under the warranty or guarantee.
Damage resulting from the formation of lime scale deposits in the device are not subject to repair under the
warranty.
Warranty exchange does not cover such elements as: light bulbsû rubber componentsû heating elements
damaged by lime scaleû screws and elements undergoing natural wearû e.g. rubber seals and all kinds of
mechanically damaged elements. Any damage of components resulting from improper use is also excluded
from the warranty.
The warranty is automatically voided in the event of a broken warranty seal or independent repairs.
