5 Installation at Site
5.1 Safety regulations
DANGER
Improper installation in potentially explosive atmospheres
Explosion hazard!
Damage to the lifting unit!
▷
Comply with the applicable local explosion protection regulations.
▷
Observe the information in the technical product literature and on the name
plates of tank and motor.
WARNING
Hot motor surface
Risk of injury!
▷
Allow the motor to cool down to ambient temperature.
CAUTION
Incorrect connection of the three-phase motor
Damage to the lifting unit!
▷
Always use a 3-pole mechanically interlocked K-type automatic circuit breaker
for external protection.
5.2 Checks to be carried out prior to installation
Place of installation
WARNING
Installation on mounting surfaces which are unsecured and cannot support the load
Personal injury and damage to property!
▷
Use a concrete of compressive strength class C12/15 which meets the
requirements of exposure class X0 to EN 206-1.
▷
The mounting surface must have set and must be completely horizontal and
even.
▷
Observe the weights indicated.
Check structural requirements.
All structural work required must have been prepared in accordance with the
dimensions stated in the outline drawings/connection examples. (
5.3 Installing the lifting unit
NOTE
Lifting units should not be installed next to sleeping or living quarters.
WARNING
Insufficient ventilation
Personal injury and damage to property!
▷
Provide proper aeration and ventilation.
▷
For room drainage, a pump sump must be provided.
5 Installation at Site
mini-Compacta
21 of 86