10
•
Do not obstruct any air vents or drains pre-
sent on the appliance.
•
Do not tamper with appliance components.
COMMISSIONING
Following installation, conversion to a diffe
-
rent type of gas or any maintenance ope-
rations, check appliance operation. In the
event of any malfunction, consult the next
paragraph"Troubleshooting".
ELECTRICAL APPLIANCES
Switch on the appliance as directed in the
instructions and reminders for use given in
Chapter " INSTRUCTIONS FOR USE " and
check:
•
the current values of each phase.
•
the correct operation of the heating ele-
ments.
15 TROUBLESHOOTING
ELECTRIC GRILL (TILT UP HEATING
ELEMENTS)
The appliance does not heat.
•
Defective energy regulator.
•
Le resistenze sono guaste.
Heating cannot be adjusted.
•
Defective energy regulator.
16
REPLACING COMPONENTS
REMINDERS FOR REPLACING COMPO-
NENTS.
•
Disconnect the appliance electrical power
supply, if present, before proceeding with
any operation.
•
After replacing a gas system component,
check for gas leaks at connection points.
•
After replacing an electrical system com-
ponent, check it is correctly wired.
ELECTRIC GRILL (TILT UP HEATING
ELEMENTS)
Replacing the energy regulator and the
indicator light
•
Remove and replace the component.
•
Re-assemble all parts. For assembly, pro-
ceed in reverse order.
Replacing the elements.
•
To take the heating unit out of the tank, lift
it up and turn it using the lifting handle until
it remains hooked up.
•
Remove and replace the component.
•
Re-assemble all parts. For assembly, pro-
ceed in reverse order.
17
CLEANING THE INTERIOR
•
Check the condition of the inside of the ap-
pliance.
•
Remove any built-up dirt.
•
Check and clean the fumes exhaust sy-
stem.
18
MAIN COMPONENTS
ELECTRIC GRILL (TILT UP HEATING
ELEMENTS)
•
Energy regulator
•
Indicator light.
•
Heating element