Rev. 3.00
22067_EDEBD
A0239-3617-3_EN
72
KBR multimess F144-2-LED-ESMS...-4
10 Reset and delete function
10.1 Reset
+
+
Only reset the energy
meter during setup or if
the device is completely
reprogrammed
Caution!
Reset will reset
all programmed values
to the default settings!
To reset, go to the Default settings submenu of the Extra
menu.
Hold the buttons digit, delete and right arrow at the same
time. The 15-segment display will show "KILL" during reset.
The device is reset to its default settings, i.e. all stored data
are lost!
This includes all operating parameters, limits and extreme
values as well as the off-delay of the signaling relays. The
memory for limit violations is deleted.
The settings for time, date and bus address are not affected
by a reset.
Check all operating parameters for correctness!
10.2
Delete energy meter
10.2.1 Delete energy meter manually
Hold the
button for about 2 seconds to delete the continuous energy meter
value currently displayed (active or reactive energy, HT or LT, consumption or
recovery).
10.2.2 Delete all energy meters
To delete all energy meters, you can either reset the device or use the optionally
available software and KBR Energy Bus.
10.3
Deleting extreme values
10.3.1 Deleting individual extreme values
Press the
button for about 2 seconds to delete the extreme values (mini-
mum or maximum values) currently displayed.
Reset and delete function
