manualshive.com logo in svg

KBO Hurricane, Owner'S Manual, Page: 18 / 22

Share
Download
KBO Hurricane Owner'S Manual Download Page 18

Basic Troubleshooting

 All users must read and understand this manual before �irst use. Additional manuals for components used on your bicycle may also be

provided and should be read before use in addition to this manual.

◆ Ensure that you comprehend all instruction and safety notes.

◆ Ensure the bike �its you properly before �irst use. You may lose control or fall if your bike is too big or too small.

◆ Always wear an approved bicycle helmet whenever using this product and ensure that all helmet manufacturer instructions are used for �it

     and care of your helmet. Failure to wear a helmet when riding may result in serious injury or death.

◆ Ensure correct tightening and setup is performed on your bicycle before �irst and checked regularly.

◆ It is your responsibility to familiarize yourself with the laws and requirements of operation of this product in the area(s) where you ride.

◆ Ensure handle bar grips are not damaged and properly installed. Loose or damaged grips can cause you to lose control and fall.

Safety Check

Basic Steps

Most Common Solutions

1. Damaged motor bearings

2. Damaged wheel spokes or rim

3. Damaged motor wiring

1. Replace

2. Repair or replace

3. Repair or replace motor

16

Wheel or motor makes strange 

noises

Summary of Contents for Hurricane























Reviews:

No comments