KBL SI00088, Service Information, Page: 19 / 32

S I 0 0 0 8 8 - I n s t a l l D S I / D a l i c o n v e r t e r
19
General
information Safety notes
About these instructions
This operating manual is intended for use by
• qualified, trained and authorized service technician.
Any person dealing with with this tanning device
must have read and understood these instructions.
Keep this manual ready to hand at all times.
Definitions
QUALIFIED, TRAINED AND AUTHORIZED
SERVICE TECHNICIAN
Qualified and safety-trained specialist personnel of
the manufacturer, or an outside company trained and
authorized by the manufacturer for the installation
and maintenance of KBL tanning devices.
Application note
DALI replacement electronic ballasts
(5119900039) are required for the use of
the DSI/DALI converter.
Before carrying out any work, the tanning device
must be disconnected from the mains voltage.
DANGER
Live parts
Risk of death or fatal injury due to electric
shock when touching live parts.
• Switch neutral
• Secure against reconnection
• Check for neutrality
• Ground and short-circuit
• Cover or shield any adjacent live parts or
components
Intended use
The replacement assembly “DSI/DALI converter”
(5119900040) can only be used as a replacement
part for the following DSI electronic ballasts:
Electronic ballast PCA 2/200 PCB
3200271130 (and replacement 3200271131)