08/2017
• Maintain the minimum distances from
ceiling
and
bottom
:
80 mm
70 mm
- Insufficient air supply leads to overheating. This
can lead to damage the tanning device!
Cleaning of the tanning device
WARNING
These cleaning works must be carried
out by qualified, trained and autho-
rized service technician.
After each tanning session
Always comply with the specified cleaning intervals,
see chapter 9.1 “Instructions on cleaning, disinfec-
tion and care” in the current operating instructions.
Every 6 months
Make sure that the inside and outside of the
tanning device is cleaned and free from dust, fluff
or objects.
- Check the correct position of the plugs on the top
of the rear of the appliance after each cleaning!
- Insufficient cleaning results in overheating. This
can lead to damage the tanning device!
Approved UV tubes installed
Make sure that the correct UV tubes are installed.
Only replace UV low-pressure lamps with the original
type or compatible lamps:
megaLine 2086 R 230W ->
TE-time
7
minutes
KBL item no.: 3230074855
megaLine 2082 R 230W ->
TE-time
10
minutes
KBL item no.: 3230075060
- The use of any other UV lamps voids the operating
license!
Installation record form filled out
Check whether the installation record is completed
correctly.
2.7
2.8
2.9
