M a n u a l e o p e r a t i v o
|
megaSun Shuttle 360°
33
Changing the SD card in the
MP3 player
1. Remove the seating surface.
2. Loosen the covering plate, tilt it slightly and extract
it towards the backrest.
3. Push the SD card slightly into the MP3 player and
then remove it. You can now replace the card or
upload new music to it.
4. Insert the SD card, fasten the covering plate and
the seating surface.
5. Re-start the device. To do so, pull out the main
plug and plug it in again. In this way, you make
sure that the MP3 player will identify the SD card.
Recording to an SD card
Please refer to the chapter “Technical data” for further
information on supported card sizes as well as
fi
le-
system and MP3-formats.
Using the SD Writer software (download from www.
kbl-support.de/software/software.html), you can add
or delete audio
fi
les to the SD card for music at your
convenience. These tracks are played after the
corresponding source has been selected. The number
of
fi
les is limited by the storage capacity of the SD
card.
The SD card may only be formatted with FAT16.
1. Insert the card into the computer.
2. Call SD Writer and copy
fi
les onto the card.
3. Insert the card into the MP3 player.
4. Re-start the device. To do so, pull out the main
plug and plug it in again. In this way, you make
sure that the MP3 player will identify the SD card.
