M a n u a l e o p e r a t i v o
|
megaSun Shuttle 360°
25
ACTIVATNG/DEACTIVATING AQUACOOL
The menu item
PIN II/AQ
is used to activate the
aquaCool function (top mark) or to deactivate it
(bottom mark). If the function is deactivated, the
aquaCool symbol is not displayed, and the studio
customer cannot activate aquaCool.
1. Invoke the
PIN II
menu and enter the PIN.
2. Select
AQ
via 5 (
plus button) or 0 (minus button).
3. Activate the function by pressing 4 (
plus button) or
9 (
minus button).
4. Save the settings by pressing START and exit the
menu by pressing the STOP button.
AquaCool tests
AQUACOOL TEST CYCLE
The menu item
PIN II/TEST/AQUATEST
allows for
starting a spraying cycle to test the spraying function.
1. Invoke the
PIN II
menu and enter the PIN.
2. Press 5 (
plus button) or 0 (minus button) to select
TEST
.
3. Press START to select the submenu
AQUATEST
.
Activate the test via START.
AQUACOOL ENDURANCE TEST
Under the menu item
PIN II/TEST/AQUA EXTR.
you can determine whether an aquaCool endurance
test is to be started with the following tanning session.
This test has a cycle time of 5 minutes and covers the
whole of the tanning time.
1. Invoke the
PIN II
menu and enter the PIN.
2. Press 5 (
plus button) or 0 (minus button) to select
TEST
.
3. Press the START button to invoke the submenu
and 5 (
plus button) or 0 (minus button) to select
AQUA EXTR.
.
4. Select
AQUA EXTR. ON
by pressing 4 (
plus
button) or
AQUA EXTR. OFF
by pressing 9 (
minus
button).
Initialising aquaCool
The menu item
AAC/AQUA/INIT
is used to start
the initialisation of aquaCool. During this process, the
hose is
fi
lled with
aquaCool liquid. The initialisation
process must be performed during start-up and after
each emptying of the hose.
1. Invoke the
AAC
menu.
2. Press START twice to invoke the submenu and
then press 5 (
plus button) or 0 (minus button) to
select
INIT
. Activate the initialisation by pressing
START.
3. Save the settings with START and press STOP to
exit the menu.
Querying software information
VERSION
Select the menu item
PIN II/VERSION
to display
the name and number of the installed software
version. This information is also displayed for approx.
2 seconds after the unit has been switched on.
1. Invoke the
PIN II
menu and enter the PIN.
2. Press 5 (
plus button) or 0 (minus button) to select
VERSION
.
3. Press START to display the version information.
DOWNLOAD
The menu items
PIN II/la.Download
and
PIN
II/fi.Download
indicate time and date of the
latest (
la.Download)
or of the
fi
rst (
fi.Download)
software download.
1. Invoke the
PIN II
menu and enter the PIN.
2. Select
la.Download
or
fi.Download
by
pressing the button 5 (
plus button) or 0 (minus
button).
3. Press the START button to display the
corresponding information.
