A s s e m b l y I n s t r u c t i o n s
|
7000
α
/8000
α
touch
32
• Attach cover plate.
PH2
5.3 Assemble the feet of the
tanning device
PH2
13
5.3.1 FASTEN SPACER PLATES
⑯
⑰
⑱
⑲
⑳
㉑
• Fasten 4 spacers on the outside of the right foot.
⑱
⑲
⑳
㉑
PH2
• Fasten 2 spacers on the outside of the left foot.
⑯
⑰
PH2
Each plate is fastened with two self-tap-
ping screws 4,2x9,5 - PH2.
5.3.2 SCREW ON THE FEET
Similar to disassembling steps (4.9).
• When attaching the screw, the foot must be lifted
slightly at the rear.
5.4 Install canopy
PH2
19
7
3
10
PH2
5.4.1 LIFT THE CANOPY ONTO THE REAR WALL
Similar to disassembling step (4.8.7).
• Lift canopy parallel by three or four people.
Do not damage cables or wires.
• Lift the canopy onto the rear wall so that the side
stop pins hook over the hooks of the end stops.
5.4.2 FASTEN THE CANOPY
Similar to disassembling step (4.8.6).
5.4.3 ESTABLISH CONNECTIONS
Similar to disassembling step (4.8.5).
Summary of Contents for megaSun 8000 a Hybrid
