KBL megaSun 7900 Alpha, Manual

Page: 35 / 60

Factory setting
: Depending on the operator country
These settings must only be made by
trained service personnel!
EASYCARE\SETTINGS 07/07
Melanin min runtime
>
> 1.. .20
Displays the current values during a melanin
measurement.
This function is intended for sensor diagnosis to be
performed by qualified service staff!
EASYCARE 02/03
Sensor-Check
> 00000
Sets the volume of the easyCare voice-guidance
system.
Factory setting
: 4
>
> 0 .. . 9
EASYCARE 03/03
Volume
UV-LEVEL 01/01
SET UV-LEVEL
>
These settings must only be made by trained
service personnel!
Loads the factory (default) settings.
SERVICE 01/10
Load factory defaults
> Reset: press `-` for 2s
SERVICE 02/10
PERSONAL PIN
> press ENTER
Submenu call
with START/ENTER.
PERSONAL PIN activate / deactivate
Enter your personal PIN.
SERVICE\PERSONAL PIN 01/01
ENTER SOLARIUM PERSONAL PIN
> PIN:
SUBMENU
Submenu call with START/ENTER. Displays the
current firmware typ / variant.
SERVICE 03/10
FIRMWARE-TYP
> press enter
И н с т р у к ц и я п о э к с п л у а т а ц и и | megaSun 7900
α
lpha
35