KBL megaSun 7900 Alpha, Manual

Page: 21 / 60

И н с т р у к ц и я п о э к с п л у а т а ц и и | megaSun 7900
α
lpha
21
Standby mode / service mode
While the tanning unit is in standby mode, you can
switch the decorative lighting of the sunbed on and
off and trigger an aquaCool spraying test (1 spraying
cycle).
When the unit is in service mode, you can make the
presettings for operation in tanning mode, and you
can have values concerning the operation of the
sunbed displayed.
Layout of the display numbers
The buttons of the interior display are allocated
double functions. In addition to the standard operating
elements, they stand for numbers that, in standby
mode, provide access to standby and service
functions. Simply enter the corresponding sequence
of numbers on the display.
1 2 3 4 5
0 9 8 7 6
Switching the decorative
lighting on and off
5 0 5
NOTE
The connection times of the decorative lighting can
be set in the service menu individually for each day
of the week.
There are two independent connection periods (A
and B) available for each day of the week.
aquaCool spraying test
4 9 4
Invoking the service menu
1 6 1 0 0 0 0
NOTE
Do not let too much time pass between the individual
keystrokes when entering a sequence of numbers!
PIN