10
Operation and Service megaSun 6900
aquaCool
Off
ON
Facial tanners/
Shoulder tanner
The shoulder tanners‘ controlling is coupeld to the facial tan-
ners. The shoulder tanners are switched on together with the
facial tanners, but the shoulder tanners‘ power can not be redu-
ced. If the facial tanners are switched off, the shoulder tanners
are switched off too.
Important: Do not operate the shoulder tanner without lamp
unit.
Level II Once the tanning program has been started, the facial
tanners are automatically switched on at maximum
setting.
Level I To reduce the output to level I, use the
fi
eld “–”.
This step is not available with megaSun 6900 Super,
Super Power and Ultra Power UV type 3.
Level 0 To switch off the facial tanners completely, touch the “–”
fi
eld again for at least 3 seconds.
By touching the “+”
fi
eld you can switch the facial tanners on
again or you can increase their output.
When the system has been switched off, there will be a time lag
before you can switch it on again due to the necessary cooling
of the burners.
Here you can activate the aquaCool water-atomisation func-
tion (plus button, symbol
fl
ashes) or deactivate it (minus button,
symbol does not
fl
ash). Default setting at start: as de
fi
ned on
service level I in the AAC/Aqua menu.
If the aquaCool supply is running low, the message
Aqua
low
is shown on the display between the tanning sessions.
When the message appears for the
fi
rst time, the aquaCool
supply will last approx. another 2.5 hours of operation with
aquaCool.
If the aquaCool supply is empty, the message
Aqua 0%
appears and the symbol is crossed out. If the system is to
be used without aquaCool, you can switch off the messages
and the symbol. For this purpose, set the submenu Aqua
to “OFF”. To reach this menu, proceed to the AAC menu on
service level II.
•
•
Water tank is
empty