25
Operation and Service KBL 4000/4500
3.11. Condensate pump
The condensate pump is controlled by the processor in such a
way that, during the tanning session, it is switched on every 5
minutes for 20 seconds ( ) each. After the tanning session is
over, this sequence is repeated 3 times.
tanning session
pump 5 min
Check the function of the condensate pump each time a tube is
replaced.
Open the front cover and slowly fi ll the condensate pan in the
air-conditioning unit with water.
Ensure that the water is pumped out when the pan is around
half full. For this check, the mains voltage must be connected.
By servicing the unit regularly and properly you substantially
contribute to a long period of trouble-free and safe operation.
The condensate hose must be guided into the condensate tank
without being kinked. The maximum height of the hose must not
exceed 25 cm from the bottom level of the tanning system.
Function
Maintenance
Figure 3-25 Condensate outlet at the rear right-hand side
