33
Operating Instructions KBL 7900/KBL 7000/KBL Convertible
7.2 External players
The wiring for 2-phase operation is shown below.
1.
Re-wire the 3 cables according to the diagram.
2.
Make sure that you use the right cable for the power supply.
A
B
C
gnd
L1(R)
L2(S)
2
K2.3
3
K2.5
1
K2.1
X0.L1
F1.A
F2.A
N6
X4.3
X0.L3
Steckd
CA
X2.3
X6.3
X4.2
K1.A2
X2.5
X2.2
X1.9
E2.3
X4.1
X2.1
X7.3
X2.4
N5
N4
N3
N2
N1
L3
L2
L1
X0.1
K1.1
K1.3
X0.N6
X6.4
PE
PE X2.9
D
K1.5
2
change connections
from[X0.L2C]to[X0.L3B]
from[X0.L3D]to[X0.L2C]
from[X0.L1B]to[X0.L3D]
3
remove connections
from[X0.L2B]to[X0.2D]
from[X0.L3B]to[X0.3D]
1
set jumper
from[X0.1]to[X0.3]
Wago 2004-403
KBL 3200453510
set wire jumper (AWG8)
from[X0.L1B]to[X0.L2B]
4
5
6
7
3
5
6
7
4
2 x 220 V
AWG 3
A line-in connector is available in the head area of the bed, on
the right-hand side, so that the studio client can plug in his/her
own equipment, e. g. MP3 player, iPod, etc. Use a standard 3.5
mm jack cable (included if the music option has been ordered).
If an external player is plugged into this connector, the system
switches over automatically and plays the music of the personal
player. This assumes that you have selected the “Studio” option
of the menu item “Audio” in the service menu I.
A level adjustment is performed using the volume control of the
panel of the solarium, and the volume control of the external
player.
The tanning unit can only be operated with audio sources if you
have purchased the optionally available audio package. For
further information, please refer to the chapter “Operation in
service mode”.
