A s s e m b l y I n s t r u c t i o n s
|
KBL 4800
α
/ 5600
α
9
4. Assembly
4.1 Tools and aids
①
Standard phillips screwdriver (PH2)
②
Screwdriver 5 mm
③
Socked wrench,
hexagon socket 6 mm
④
Cordless screwdriver & bit set
1.
Open the bed part and disconnect all cable connec-
tions between the beth and the canopy as well as all
cable connections between beth and front part.
2.
Remove the 6 knurled-head screws as it shown in the
illustration. 2 screws on each side and 2 in the middle.
4.2 Work steps
• Be careful! Do not damage the acrylic and
plastic parts. Handle these parts with the
necessary precaution.
• Do not use safety bolts for transportation
lock.
The canopy is not designed to carry additional
loads. In particular, during installation the canopy
must not be charged with additional loads.
6