3
2 4 4 1 2 M a i n S t . S u i t e 1 0 5 , C a r s o n , C A 9 0 7 4 5
UNIT CARE
How to drain water
Unplug the unit.
Unhook the plugs/holders with drain tubes out of the unit back and l
ower
them to a bucket or sink.
Press and hold the release buttons on the connectors to disconnect the
plugs/holders and release water.
Reconnect the plugs/holders and hook them back to the unit.
How to empty the ice bin and water reservoir
Dispense ice until no more ice comes out of the ice dispense point.
Drain water following instructions above.
1-If the Water Level red LED flashes quickly and the unit stops making
ice
Fill the water reservoir with clean potable water to MAX WATER FILL.
2-If the Water Level red LED flashes quickly when water is filled to
MAX WATER FILL
Touch the water float as shown and move it upward to resettle. If it
works, you can skip the following steps.
Unplug the unit.
Summary of Contents for FDFM1JA01
