KBC ESML8P-PC2, User Manual

Page: 105 / 110

Ethernet Switch User Manual
Manual-ESML8P-PC2_Series-Rev1211
Copyright © KBC Networks Ltd.
Page 105 of 110 www.kbcnetworks.com
smtp rcptemail
[Index] [Email address]
G Configure Rcpt e-mail
Address
switch(config)# smtp rcptemail 1
Alert@test.com
show smtp P Show the information of
SMTP
switch# show smtp
no smtp G Disable SMTP function switch(config)# no smtp
event device-cold-start
[Systemlog|SMTP|Both]
G Set cold start event type switch(config)# event device-cold-
start both
event authentication-
failure
[Systemlog|SMTP|Both]
G Set Authentication failure
event type
switch(config)# event authentication-
failure both
event ring-topology-change
[Systemlog|SMTP|Both]
G Set X-ring topology
changed event type
switch(config)# event ring-topology-
change both
event systemlog
[Link-UP|Link-Down|Both]
I Set port event for system
log
switch(config)# interface fastethernet
3
switch(config-if)# event systemlog
both
event smtp
[Link-UP|Link-Down|Both]
I Set port event for SMTP switch(config)# interface fastethernet
3
switch(config-if)# event smtp both
show event P Show event selection switch# show event
no event device-cold-start G Disable cold start event
type
switch(config)# no event device-cold-
start
no event authentication-
failure
G Disable Authentication
failure event typ
switch(config)# no event
authentication-failure
no event ring-topology-
change
G Disable X-ring topology
changed event type
switch(config)# no event ring-
topology-change
no event systemlog I Disable port event for
system log
switch(config)# interface fastethernet
3
switch(config-if)# no event systemlog
no event smpt I Disable port event for
SMTP
switch(config)# interface fastethernet
3
switch(config-if)# no event smtp
show systemlog P Show system log client &
server information
switch# show systemlog