Ethernet Switch User Manual
Manual_cmd_line_config-ESML6-P3-Rev1106
Copyright © KBC Networks Ltd.
Page 29 of 49
www.kbcnetworks.com
9.2
DT-Ring configuration
9.2.1
Create / delete a DT-Ring domain
Creating a DT-Ring domain:
SWITCH(config)#dt-ring new <1-31> domain <1-32> master/slave
Where <1-31>is the domain name and <1-32> is the domain ID.
This domain can be set as master / slave.
Deleting a DT-Ring domain:
SWITCH(config)#dt-ring del domain <1-32>
Where <1-32> is the domain ID.
Note:
The first step in setting up a new DT-Ring is to create a new DT-Ring domain.
9.2.2
Create/Delete the ring ports
In a DT-Ring, ring ports should be configured to compose a redundant ring topology.
Create a ring port:
SWITCH(config)#dt-ring <1-32>
SWITCH(config-dt-ring-1)#ringport add <1-10>
Where <1-32> is the domain ID and <1-10> is the Port ID.
Delete a ring port:
SWITCH(config)#dt-ring <1-32>
SWITCH(config-dt-ring-1)#ringport delete <1-10>
Where <1-32> is the domain ID and <1-10> the Port ID
Note:
Only two ring ports are allowed on one switch.
9.2.3
DT-Ring protocol Enable/Disable
Configuration is required in order to enable the DT-Ring.
Enabling the DT-Ring :
SWITCH(config)#dt-ring <1-32>
SWITCH(config-dt-ring-1)#protocol enable
Where <1-32> is the domain ID.
Disabling the DT-Ring :
