Ethernet Switch User Manual
Manual_hw-ESML3-FL2-D4-Rev1011
Copyright © KBC Networks Ltd.
Page 17 of 18
www.kbcnetworks.com
7.2
Class A ITE
This is a Class A product. In a domestic environment this product may cause radio
interference in which case the user may be required to take adequate measures.
7.3
FCC
This equipment has been tested and found to comply with the limits for a Class A
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference when the equipment is
operated in a commercial environment. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance with the
instruction manual, may cause harmful Interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful
interference in which case the user will be required to correct the interference at his
own expense.
8
Instruction of Disassembly
Instruction of Disassembly of KBC Product
(For EU Directive 2002/95/EEC-WEEE)
Tools required:
•
No. 1 Phillips screwdriver
•
No. 2 Phillips screwdriver
Steps for disassembly:
1.
Remove tightening screws of box cover (8 screws).
2.
Remove cover plate.
3.
Remove tightening screws for printed circuit board (PCB).
4.
Take out all PCBs.
Notice: When a product reaches the end of its life – return to KBC.
