ESMGS8-P4 Web
User’s
Manual
36 /
104
for the frame.
Aggregation configuration
:
this configuration is used to configure the Aggregation hash mode and the aggregation
group.The aggregation hash mode settings are global, whereas the aggregation group relate to the currently selected
stackunit, as reflected by the page header.
Interface items
Configuration
Introduction
Factory setting
Group ID
Normal/1-5
Indicates the group ID for the settings
contained in the same row. Group ID
"Normal" indicates there is no
aggregation. Only one group ID is
valid per port.
Normal
Port Members
Select/not select
Each switch port is listed for each
group ID. Select a radio button to
include a port in an aggregation, or
clear the radio button to remove the
port from the aggregation. By
default, no ports belong to any
aggregation group. Only full
duplex ports can join an aggregation
and ports must be in the same speed
in each group.
not select
B. LACP
Enter
【
Aggregation
】
→
【
LACP
】
navigation column, The switch supports dynamic aggregation port, after port
enable LACP, Aggregation of both devices via protocol interaction gathering information, according to the parameters
and status, automatic matching link aggregation together send and receive data. After forming aggregation, switching
equipment maintenance aggregation link state, when the two sides configuration changes, automatically adjust or
dissolve aggregated links.
If some ports have been static port aggregation, LACP dynamic convergence can not be achieved.