ESMGS8-P4 Web
User’s
Manual
26 /
104
EAPOL Timeout
1-65535 second
Identity EAPOL defined time frame resend
request, and this time on the MAC-based
authentication is invalid
30
Aging Period
10-1000000
second
Certification
aging
time,
after
authentication, within Aging Period of time
no longer detect the device, the
authentication will automatically lapse
300
Hold Time
10-1000000
second
After the authentication fails, the re-
certification intervals, during this time do
not accept the authentication request of the
terminal
10
Port configuration interface items introduction
Interface
items
Configuration
Introduction
Factory setting
Port
1-n(Number
of
physical ports)
To configure the switch port number
port
1-n
Admin State
Force Authorized
In this mode, when a client is connected
to the port, the switch will automatically
send an EAPOL success frame, you can
access
the
network
without
authentication
Force Authorized
Note:
If set to a
non Force
Authorized port,
you can not open
the port Spanning
tree, and
Aggregation
functions
Force Unauthorized
In this mode, when a client is connected
to the port, the switch will automatically
send an EAPOL frame failure, any
client cant access the network
802.1X
Using 802.1X authentication mode
MAC-Based Auth.
Using MAC-Based
authentication
mode
Port State
Globally Disabled
NAS all Disabled
Link Down
NAS all Enabled, but port cant
