Extended Ethernet User Manual
Manual-EE1R3_Series-Rev1208A
Copyright © KBC Networks Ltd. 2012
Page 5 of 12
www.kbcnetworks.com
2.3
Installation Method
2.3.1
Chassis
Remove all packaging material
If chassis is to be mounted in a 19” enclosure, attach the supplied rack
mount brackets to the converter chassis.
Locate the converter chassis with the 19” mounting rails and attach using
the screws provided.
With the power switch in the ‘OFF’ position, connect the power cord and
then select the ‘ON’ position for the power switch.
Insert the EE1CL units into the EE1R3 chassis as required.
Connect required media cables to the EE1CL devices.
See section 3.5 for LED status.
2.4
Power Connections
This unit must be powered by a 100 ~ 240Vac, 3.3A power supply, this is an integral unit
which is supplied with the chassis.
