eCopper™
QSG-ECEF1-LS1-T-IN-B_Series-Rev1808
www.kbcnetworks.com
Copyright © KBC Networks 2018
Quick Start Guide
EECF1-LS1-T-IN-B
EoC Transmitter with PoC, PoE+ BNC and RJ45 with flying cable
Introduction
The KBC EECF1-LS1-T-IN series is a fully ruggedized Ethernet over coax
transmitter. This transmitter provides connectivity for one 10/100Mbps IEEE
standard twisted pair copper port over a 75ohm coaxial cable. Power is
supplied from one of the headend receivers, EECF16-GN3-R, EECF8-GN3-R,
EECF4-DN1-R, or EECF1-LN1
–
R Ethernet over coax switch through the coaxial
cable by Power over Coax (PoC) technology. This transmitter provides
PoE/PoE+ support. Varying data rates are supported depending on cable
distance and quality. The plug-and-play design ensures ease of installation
with no electrical adjustment needed. LED indicators are provided to clearly
show the operational status of the unit.
The size of the transmitter is suited for fitting inside camera housing and
where space is minimal.
Features
•
802.3af/802.3at compliant
•
PoE+ (30W) and Power over Coax
•
Coax data rate >50Mbps (300m) based on coax quality
•
PoE+ is supported up to 300m based on coax quality and applied voltage
to headend
•
Powered by PoC from headend: EECF16-GN3-R,EECF8-GN3-R,EECF4-DN1-
R,or EECF1-LN1-R
•
Complete protection design including surge protection, lighting protection
•
Unique PoC transmission protection design together with 1,4,8 and 16
channels
Downloads
Full specifications, features and additional information can be found on the
relevant product page on the KBC website as well as in the downloads section:
http://www.kbcnetworks.com/downloads
