1
1
Procedure diagram
Remove the screws
①
and
②
, rotate the filter bracket, pull out the filter.
Only professionals can change and disassemble the filter. Any improper operations may cause electric shock
or injuries due to touching rotating parts.
Clean the filter with a vacuum cleaner, with the
air inlet side of the filter facing upwards.
Clean the filter with clean water (except for the
activated carbon module), with the air inlet side
of the filter facing downwards.
1
2
1
2
Screw
Screw
Screw
Screw
Note
2
Clean the filter.
To avoid deformation of the filter, do not use fire or a burning appliance to dry the filter.
If the filter is heavily soiled, use a soft brush and neutral detergent to clean it, then shake off the water and
dry it in a cool place.
Non-professionals should not disassemble, replace or repair the filter.
Caution
5
4
Reinstall the filter.
Reinstall and close the air inlet grille by following steps 1 and 2 above in reverse.
54
Cleaning, Maintenance and After-Sales Service
Summary of Contents for KSEF-22 DN5.0
Page 60: ......
