2
3
Remove the air inlet grill
Take out the HEPA filter
Install the HEPA filter
Install the air inlet grille
Plug power supply
Install the Pre-Filter
Remove the protective film
of the filter assembly
Hold both sides of the HEPA
filter with both hands, and take
it out
Align the slot position at the bottom, and click into
the upper U-shaped snap joint.
Align the slot position at the bottom, press
both sides of the upper part of the air inlet
grill, and buckle up the air inlet grill.
Take out the Pre-Filter
Press down and pull the
U-shaped snap joint, and take
out the Pre-Filter.
Installation Instructions
Installation steps
1
2
3
4
5
6
7
8
