Part 3 - Ins
talla
tion and Field Se
ttings
DC Inverter Chiller
67
Press the "
▲
" and "
▼
" buttons to set the values and press "OK" button to save the setting and return to the previous
interface, or press the "BACK" button to cancel the setting and return to the previous interface. If there is no operation in
60 seconds, the wired controller will return to the home page.
d. Set defrosting
Select "SET DEFROSTING", and press the "OK" button to enter the interface, The interface display is as follows.
Figure 3-7.13: Set defrosting interface
Press the "
◄
" and "
►
" buttons to select the desired option, and press "
" and "
" buttons to set the temperature and
press the "OK" button to save the setting and return to the previous interface, or press the "BACK" button to cancel the
setting and return to the previous interface. If there is no operation in 60 seconds, the wired controller will return to the
home page.
e. Set heater
Select "SET HEATER", and press the "OK" button to enter the interface, If it is controlled by single water pump. The
interface display is as follows.
Figure 3-7.14: Set heater interface
HEAT2(DISABLE)
Press the "
▲
" and "
▼
" buttons to select the desired option, and press "OK" button to access the interface. When select
the "HEAT1", and press the "OK" button to access the interface, The interface display is as follows.
Figure 3-7.15: Set Heat1 interface
5
C
Notes:
1. The value of "Tw_Heat1_OFF" is bigger than "Tw_Heat1_ON".
2. HEAT2 function is disabled, so user cannot enter the HEAT2 interface.
