4
● Install the panel component, and wiring
(take 22-36 as an example, operation method of 71 are the
same.)
● Two buckles on the panel component are used for assisting the
panel installation, the installing method of the buckle as Fig.5.10
display.
● Panel component wiring: open the electric control panel,
connect the wiring terminal of the control display box and the
motor connecting terminal of the air leading bar as the figure
display to the main control panel.
Panel installation bolt: M4X22
Fig.5-8
After
First
Fig.5-10
Panel component installation
(take 22-36 as an example, operation method of 71 are the
same.)
● Remove the air return grille, filter screen, screw hidden cover.
● As the grille switch arrow indication direction to pull the lock
catch, remove the air return grille.
● Pull the buckle as figure display, remove the filter screen.
● Open the air leading bar, remove three screw hidden covers.
● Take down the air return grille, filter screen, screw hidden cover
and please safely keep them, do not lose, dirt and damage them.
5-core cable plug on the panel connects
to CN22 of the main control board
5-core cable on the panel passes into the
electric control box through this opening
Open the air leading bar, remove three
screw hidden covers. Pay attention to the
filter screen and the screw hidden cover.
10-core cable plug on the panel connects to CN15 of the main control board
10-core cable on the panel passes into the electric control box through this opening
Fig.5-11 (22-36 model)
5-core cable plug on the panel connects to CN22 of the main control board
Fig.5-9
10-core cable plug on the panel connects
to CN15 of the main control board
2 wires on the panel pass into the electric
control box through this opening
Please use wire clamp to fix the cable,
otherwise it will result in short circuit
caused by wire looseness
Fig.5-12 (71 model)
24m
m
Summary of Contents for KCOF-22 DN2.4
Page 15: ...MD13I 024KW 16126000000044 ...
Page 16: ......
