EN
20
USE
CONNECTION
Connecting the gas container
1. Turn the gas control clockwise (viewed from in front) until it
stops, and check that the sleeve is completely closed.
2. Hold the gas cylinder and the product upright and screw
the product on the gas cylinder. Screw tight, but do not
overtighten.
FIG. 1
NOTE:
The gas cylinder must have a threaded union.
IMPORTANT!
Always check for a gas leak before use.
LIGHTING
• Turn the gas control slowly anti-clockwise and press the spark
plug to ignite the burner. If the burner does not light when
the control is fully open, close the control again and repeat
the process.
• The product is intended for pans with a bottom diameter of
no more than 18 cm. Pull the supports to fold them out.
FIG. 2
IMPORTANT!
•
Always check before lighting that there are no flammable
substances nearby.
Summary of Contents for 956125
Page 4: ...1 2 ...
