
EN
14
1.
Fit the wheels on the frame (fig. A and B). Make sure the wheels are securely tightened.
2.
Fit the reflectors on the trailer (fig. C). The orange reflectors must be put on the sides of the trailer and the red ones on the back.
3.
Fit the reflectors on the wheels.
4.
Fit the drawbar to the frame (fig. D). Secure it in place with the bolts, washers and nuts. Make sure the bolts are securely tightened.
5.
Put the plastic tub in the trailer (fig. E).
6.
Fit the fastener (1) on the saddle post (see above).
7.
Align the holes in the support (2) and coupling (3) to the holes in the fastener (1). Fasten the parts with the bolt (4) and nut (5)
8.
Pull the coupling release lever backwards and fasten the drawbar in the coupling.
9.
Make sure the drawbar is correctly positioned in the coupling.
Summary of Contents for 326036
