ZHEJIANG KAYO MOTOR CO., LTD.
www.kayomoto.com
- 69 -
MOTORCYCLE CLEANING
The cleaning of the vehicle is also an important part of the daily use and maintenance of the motorcycle.
Frequent cleaning of your motorcycle can keep your car in a good state of motion and prolong its
service life. You can clean your motorcycle through the following steps:
1.
Cover the exhaust system to prevent water from entering;
2.
Seal the electric door lock and all connectors with tape;
3.
Use a low-pressure water spray device to remove the mud and dirt on the surface;
4.
Use a special motorcycle cleaner to clean particularly dirty places;
5.
Flush with low-pressure water flow;
6.
Let the motorcycle air dry naturally;
7.
Drive the motorcycle for a short period of time until the engine reaches the working temperature;
8.
Lubricate the chain and all other parts that need to be lubricated.
WARINING
: Never use high-pressure water to clean the vehicle. Avoid direct contact with coils, pipe
plugs, carburetor or any electrical components.
STORAGE
PREPARING FOR LONG STORAGE
If you want to garage the motorcycle for a longer period,
take the following steps.
1.
Block the exhaust port of the muffler tube;
2.
Clean the motorcycle
3.
Wait for the motorcycle to dry naturally;
4.
Empty the fuel tank (if not used for a long time, the
gasoline will deteriorate);
5.
Lubricate the chain;
6.
Apply oil to all unpainted metal surfaces to avoid
rust;
7.
When storing the motorcycle, keep the motorcycle
wheels suspended. If this condition cannot be
achieved, you can use cardboard to pad under the
motorcycle tires;
8.
Cover the motorcycle to prevent dust and dirt.
