ZHE JIANG KAYO MOTOR CO., LTD
WWW.KAYOMOTO.COM
39
Remove the self-lock nut 3 which is connected to the exhaust pipe and the exhaust
vent of the engine, and then remove the exhaust pipe.
Installation
In the reverse order of disassembly, pay attention to check the seal 4 of the exhaust
pipe and the graphite sleeve 5 which is installed in the muffler during the operation,
and replace with the new ones when they are broken. If the self-lock nut is damaged,
replace it with a new one immediately.
4.5 Disassembly and installation of engine
Disassembly
Note: The foot pedal must be removed first,then remove the engine from the frame.
1. Remove the side-cover 1 of engine first, then remove the chain.
2.Remove the ground wire, gear display wire, magneto motor wire, starter motor
wire, exhaust pipe ,high pressure cap, shift lever from the connection of engine.
exhaust
pipe
starter
motor
wire
groun
d wire
magneto
motor wire
gear display wire
