ZHE JIANG KAYO MOTOR CO., LTD
WWW.KAYOMOTO.COM
17
2 Vehicle Covers
2.1 Maintenance information
2.2 Mounting torque
2.3 Disassembly and assembly of seat cushion, front and rear protectives, front and
rear mud plate, head cover, rear body, left and right protective plate, front body, left
and right plastic pedals and left and right pedals
2.1 Maintenance information
Work notes:
1. When replacing the overlays with the warning signs affixed and riveted on the
vehicles, the corresponding marks should be correctly and completely completed
according to the original ones.
2. This chapter describes the disassembly sequence of vehicle body panels, and
refers to this chapter when it is necessary to disassemble the related panels when
repairing the internal parts of the vehicle.
3. This chapter only describes the disassembly and assembly. If the problem of cable,
tubing and cable alignment is involved in the process of disassembly and assembly,
please refer to the cable layout chart.
2.2 Mounting torque
M8 bolt
:
18~25N*m
TM6 Large headed bolt
:
7~11 N*m
M6*bolt
:
8~12 N*m
2.3 Dismantling and assembling of head cover, handle bar, seat cushion, whole
vehicle plastic parts (front and rear fender, rear body, left and right footrest guard,
front body), front guard assembly, left and right plastic parts of pedals, left and
right pedals.
2.3.1Head cover
Disassemble
1. Remove the fixing bolts 1 and 2 (2 in
symmetrical position).
2. Push the head cover in the direction
shown in the figure. Remove the head
cover after the buckle is loosened.
(Note: the buckle on the head cover is
easy to break and operate carefully.)
Assemble
Follow the reverse sequence and
reverse direction of the disassembly.
After installation, pay attention to
checking whether the cushion is
installed in place and reliable.