ZHEJIANG KAYO MOTOR CO., LTD.
WWW.KAYOMOTO.COM
25
Front brake pump assembly
Check the fluid level at the sight glass on the master cylinder. If brake is below the
lower limit, stop using the vehicle immediately and ispect for leaks at master cylinder,
hoses, fittings and connections. If fluid is low remove top of master cylinder and add
DOT4 brake liquid to limit position
Note:
●
When adding brake fluid, do not mix with dust and water.
●
In order to prevent chemical changes, please choose the specified brand of
brake fluid.
●
As brake fluid will damage the plastic and rubber surfaces, please do not
splash it on the parts.
Front brake disc and brake pads
〈
wear of brake block
〉
The brake pads, caliper and disc are normal wear and tear items
Check or replace the brake disc
●
Check the surface of brake disc, if it is worn, damaged, bent, or grooved
replace.
●
If the disc thickness is less than 3.0mm, replace it.
Check or replace brake pads
〈
wear of brake block
〉
●
Check the minimum thickness of block, If it’s less than 1.5mm, replace it.
●
Check for damage, cracks,and uneven wear. Replace pad set if out of
specification
Note: Replace pads in sets.
Brake oil lower
limitation