ZHEJIANG KAYO MOTOR CO., LTD.
26
Front brake is unadjustable.
Rear brake can be adjust from 1 to 5.
the factory default state is gear 3. It
can be adjusted according to rider's
needs for riding comfort.
Adjustment:
1. By absorber adjusting wrench
(crescent).
2. Turn left the absorber get soft and
right it will get hard
。
5. Places around engine
5.1 Maintenance information
5.2 Fuel system
5.3 Air intake system
5.4 Exhaust system
5.5 Disassembly and installation of engine
5.1 Maintenance information
Precautions
● Before operation and maintenance, please ensure that the vehicle is shut
down and static for no less than 1 hour, and make sure that the heating parts
are cooled, so as to avoid injury.
● Do not damage the frame, engine body, bolts and cables during
maintenance.
● In order to protect the engine frame, please wrap the engine before
operating.
● When the engine is removed, the corresponding containers should be
prepared to receive coolant, oil and fuel oil for environmental protection, and
the coolant and oil should be supplemented as required during installation.
● The engine doesn’t need to remove in following operations.
－
oil pump
adjust the softness and
hardness of absorber
Gear 3
Absorber adjusting wrench
