ZHEJIANG KAYO MOTOR CO., LTD.
21
blocked or damaged.
Note: the steering handlebar must be smoothly, or it may cause
accidents due to out of control
.
Clearance for front and rear handlebars:
Check the effect and movement
before operation. The clearance is 5-10mm.
Front brake pump assembly
Check the liquid volume. When the brake fluid volume decreases to the lower
limit, stop using the vehicle. It is necessary to check the leakage of the brake
pump, brake tube and all connections, if they are all normal, then open the
pump cap of brake and inject DOT4 brake liquid to limit position.
Note:
●
When adding brake fluid, do not mix with dust and water.
●
In order to prevent chemical changes, please choose the specified
brand of brake fluid.
●
As brake fluid will damage the plastic and rubber surfaces, please do not
splash it on the parts.
Front brake disc and brake block
〈
wear of brake block
〉
The brake pad(clamp) and disc would be wearied to some extent, it’s
formal.
Check or replace the brake disc
● Check the surface of brake disc, if it is wearied or damaged, replace it.
● If the disc thickness is less than 3.0mm, replace it.
Check or replace brake block
〈
wear of brake block
〉
● Check the minimum thickness of block, If it’s less than 1.5mm, replace it.
● Check it there is damage or crack, if it has, replaces a new one.
Note: the brake block is complete change.
Brake oil lower
limitation
