ZHE JIANG KAYO MOTOR CO., LTD
www.RideKayo.com
33
Note:
●
When adding brake fluid, do not mix with dust or water, always add fluid from a
new sealed container.
●
Brake fluid can damage plastic, painted, and rubber surfaces. Wipe clean
immediately if any is spilled
Front brake disc and brake pads
The brake pads, caliper and disc are normal wear and tear items
Check or replace the brake disc
● Check the surface of brake disc, if it is worn, damaged, bent, or grooved replace.
● If the disc thickness is less than 3.0mm, replace.
Check or replace brake pads
● Check thickness of pads, If it’s less than 1.5mm, replace.
● Check for damage, cracks, and uneven wear. Replace pad set if out of specification
Note: Replace pads in sets.
3.4
Wheel
With the atv on a jack of atv lift. Lift the
front wheels off the ground. Push and
pull the wheel in and out as shown in the
diagram.
If there is movement, check torques on
hub, steering shafts, spindles.
If there is still movement, check the
Brake fluid lower
limit
