8
15. As shown in the picture, align the mounting
screw of C (seat) with the mounting hole of the
frame, and screw it with tool
⑨
(12mm socket),
⑬
(extension rod of socket),
⑭
(torque wrench)
and T (self-locking nuts M8*8) (torque
requirement is 25-30 N·m).
16.As shown in the picture, straighten the
safety belt and put it through the inner through
hole of the seat back and then out of outer
side of seat back. Use tool
④
(14 # wrench)
⑥
(19 # wrench), R(Seat belt fixing screws, nuts,
spring washers, and thickened pads) to
tighten the seat belt and the frame (screw
installation sequence: bolt - seat belt - frame-
thickened pad - spring washer - nut).
17. As shown in the picture, align E (ceiling
frame) to the frame left and right, and tighten it
with tool
⑯
(8 # Hexagonal wrench) and P ( M10
* 20 * 1.5 hexagon socket bolts*12).
