10.Use
④
to assemble D and fix it on the
handlebar with tool
⑤
.
11. Use tool
⑧
to move the front brake upper
cylinder to the left of 6-7mm, then assemble D with
tool
④
and fix it on the handlebar with tool
⑤
.
12. Remove the wire fixed on the rear wheel,
then use tool
①⑦
to remove the front axle and
screws.
13.Put the vehicle on the stand for easy installation
of other accessories.
14. Remove the plastic clips of the front disc
brake upper & lower cylinder for subsequent
installation of the front wheel.
15. Insert the front axle from the right side, then
use tool
①⑦
to tighten the front wheel fixing nut
(torque requirement 80-90N.m)
(left long right short for the bush)
