Name
Quantity
A Accessory Box
1
B Front fender
1
C Front wheel
1
D Left and right hand guard
1
E Front disc brake disc guard
1
Name
Quantity
F
Handlebar foam & padding cover 1
G Spark plug sleeve
1
H
Coolant
1
I
Cable tie
2
J
User’s manual
1
6. Use tool
②⑩
to remove the screw on the left
side of the headlight, pull out the front brake oil
pip, then install the headlight screw back.
7. Remove the cable tie and use tool
①⑥
to lock
the clamps, the distance between the two ends of
the mark is close, tighten evenly, first start by hand
tightening all four clamp bolts. (Torque
requirement is 25-30N.m). After the installation of
the handlebar, then install the fixing screw on the
lower side of the headlight.
8. Take out F from the accessory box and
install it as shown above.
9. Use tool
⑧
to remove the front fender fixing
screw, then install B and tighten the screw.
