10. Use tool
⑩
to remove the front fender fixing
screws, install B and tighten the screws back.
11. Use tool
⑤⑦⑨
to install C (Torque requirement
is 20-30N.m).
12. Remove the front axle screw and take away
the iron frame.
13. Put the vehicle on the stand for easy
installation of other accessories.
14. Use tool
②
to remove the plastic clips of the
front disc brake upper & lower cylinder for
subsequent installation of the front wheel.
15. First use tool
①④
to install D (torque
requirement 80-90N.m) (the bushing is long on the
left and short on the right), then use tool
①③
to
lock the front shock absorber screw (torque
requirement 25-30N.m)
