1. The above picture shows the tools needed to
unpack and install the vehicle
①
Torque wrench
②
Needle nose pliers
③
12mm socket
④
21mm socket
⑤
17mm socket
⑥
No. 8-10 wrench
⑦
No. 12-14 wrench
⑧
6mm hexagon socket
⑨
Phillips screwdriver
⑩
No. 8 T-sleeve
⑪
No. 10 T-sleeve
2. Remove the straps and cardboard cover.
3. Take out the parts attached on the vehicle and
the packaging iron frame, remove the iron frame
screws, wait for subsequent installation.
4. The parts shown in the picture need to be
subsequently installed on the vehicle
5. The picture above shows the parts in the
accessory box. Please read the u
ser’s manual (G)
carefully before assembling and install these parts
according to the operation steps.
