High Speed Camera Quick Start Guide
8
The following steps will guide you through the system installation and configuration.
5.1
Essentials to get started
To begin using your JetCam system, you must have the following:
A computer with the following:
Processor with an Intel 64-bit architecture, or equivalent.
An availably x8 (or x16) PCIe slot. Gen 3 support is recommended for faster data
transfer.
Vision Point Application installation
JetCam camera
Komodo Fiber board
Fiber QSFP+ Modules
Fiber optic cable
NOTE: KAYA Instruments doesn’t guarantee compatibility with all computers that have the above
specifications. Please, consult KAYA representative for any specific issue
.
5.2
Komodo board installation
1.
Before
installing the Komodo Board, turn off the power of the computer and its peripherals.
2.
Firmly insert the Komodo board to PCIe connector of the motherboard, using the
motherboard’s 8 lanes and up PCIe connector.
3.
Verify the Komodo board inserted correctly to the PCIe slot.
4.
Anchor the PCIe bracket to the computer chassis using M3 screw.
NOTE: The Frame Grabber should be installed before you install your software.
For more detailed information please refer to Komodo Fiber Reference Guide documentation.
Installation and Connectivity
