30
CUTOFF:
Raising the CUTOFF level makes the sound brighter, lowering the
level makes the sound duller.
ATTACK:
As the value increases, the attack time becomes longer, which
means a slower attack is produced.
DECAY:
This parameter controls the amount of time from the peak level to
the sustain level of the sound.
RELEASE:
This parameter controls the amount of time needed for the sound
to fade out after the key is released.
Note:
If the selected zone is set to BOTH, changing the TONE MODIFY parameters
affects both internal and external sections. If you want different settings for
internal and external sections, enter the edit mode by pressing the MENU
button and select internal or external section with the ZONE SELECT button.
(See page33 for details.)
5.4 MIDI CC# (Control Change)
The MP8II can send any MIDI Continuous Controller information to any MIDI
Instrument or Device.
This powerful feature allows for editing the sounds of an external sound module
in Real Time during performance, or for recording Real Time performance edits
to a MIDI sequencer.
Some control changes are also effective to internal sounds.
Make sure that the MIDI CC# button in the CONTROL KNOBS section is lit. If
the MIDI CC# button is turned off, press it to turn it ON.
The CONTROL KNOBS are now active and assigned to the MIDI CC parameters.
Use the CONTROL KNOBS to change the MIDI continuous controller information
assigned to each knob as described below.
Each parameter of the Control Change has an adjustable range from 0 to 127.
When the selected zone is set to INT or BOTH, the display shows the parameter
names.
