43
ED
IT
M
en
u
EDIT Menu parameters
(PIANO, E.PIANO, SUB)
Time
Volume
Key ON
Key OFF
5
6
7
8
About DCA Parameters
The DCA (Digitally Controlled Amplifier) parameters, are used to
adjust the volume level of a sound over time using an envelope.
The diagram below indicates the MP11SE’s DCA parameters.
About DCF Parameters
The DCF (Digitally Controlled Filter) parameters, are used to
adjust a low-pass filter applied to the sound over time.
The diagram below indicates the MP11SE’s DCF parameters.
Time
Fr
equenc
y
Key ON
Key OFF
9
11
12
13
10
16. Vibrate Depth
value
: –64 ~ +63
This parameter adjusts the depth of the vibration applied to the
selected sound.
17. Vibrate Rate
value
: –64 ~ +63
This parameter adjusts the speed of the vibration applied to the
selected sound.
18. Vibrate Delay
value
: –64 ~ +63
This parameter adjusts the delay time before the start of the
vibration.
19. Octave Layer Switch
o
ff
, o
n
This parameter turns the additional Octave Layer ON or OFF.
20. Octave Layer Level
value
: 0 ~ 127
This parameter adjusts the volume level of the Octave Layer.
21. Octave Layer Range
value
: –2 ~ +2
This parameter sets the amount of octave transposition for the
Octave Layer.
22. Octave Layer Detune
value
: –64 ~ +63
This parameter adjusts the tuning of the Octave Layer.
23. Layer Vocal
value
: o
ff
, 1 ~ 127
This parameter adjusts the amount of Vocal sound that is added
to the selected sound.
24. Layer Bell
value
: o
ff
, 1 ~ 127
This parameter adjusts the amount of Bell sound that is added to
the selected sound.
25. Layer Air
value
: o
ff
, 1 ~ 127
This parameter adjusts the amount of Air sound that is added to
the selected sound.
